The reinforced thin-layer drainage
with triple effect for solid laid ceramic tiles and plaques.
Watec®3E reliably and permanently drains, ventilates and uncouples outdoor ceramic coverings, providing secure protection from frost damage and efflorescence caused by accumulated water in cavities in the thin-bed mortar. Delamination and cracks in the covering due to shear stresses in the substrate caused by weather conditions are avoided, thanks to the 100% uncoupling of the floating laid system.
Product structure
- Watec® 3E - The reinforced thin-layer drainage
- ProFin® DP17 Drainage profile
- Watec® FS joint cover strips
- DiProtec® AB-K sealing tape
- Watec®3E DP-17 drainage end profile
- ProRin® BR balcony gutter
- DiProtec® SDB quick sealing sheets
- DiProtec® AB-V sealing tape
Area of application
Tile coverings in thin bed
Substrate/covering
Substrate requirements: Even, pressure resistant, non-flexing (cannot be used directly on insulation)
Suitable substrates:
- Patio terraces with ground contact, cantilevered balconies
- Old ceramic tile coverings, floating screeds (on insulation)
Fall: Min. 1.5 % to max. 2.5 %
Seal: DiProtec® SDB quick sealing sheet, cement-based waterproof coatings
Covering sizes:
- Porcelain stoneware min. 200 x 200 x 8 mm
- Stoneware min. 200 x 200 x 10 mm
- Split tiles min. 120 x 240 x 10 mm
Maximum size: 40 x 40 cm
Height of construction including covering: from approx. 18 mm
System components and accessories
Drainage accessories
Drain grates
For draining surface water into the floor drain underneath Watec®Drain AR cover grate NEW!
Profiles, gutters and pipes
ProFin® DP-17 Drainage profile
ProRin® BR Balcony gutter system
ProRin® AL Down pipe system
Seal
Loose laid synthetic sealing sheets for quick renovation
DiProtec® SDB NEW!
Sealing strips and sleeves
DiProtec® AB NEW!
- Print Page
- |
- up