ProFin® BP/BE - Accessories are available here (PDF in German)
Coating profile for mounting on / in screed.
Safe, clean edging with balcony coatings.
Pro® Fin BP/BE profiles were specially developed for balcony coatings. Development focused on durability and providing a reliable, practical solution. The front raised edge ensures clean, safe edging. The projecting leg of the profile directs surface water away.
MOUNTING ON SCREED The Pro®Fin BP coating profile is mounted directly onto the fall screed and plugged. The substrate is smoothed with a wedge-shaped filling of EP mortar. If the bonded fall screed is smoothed over the Pro®Fin screed guide at the edges, further smoothing work is not required. Bonding with the Pro®Fin profile leg is optimised by using a sanded EP undercoat. The glass fibre mesh inlay provides additional protection against cracking. The balcony coating, colour chips and if required a clear layer are laid on top of this. |
MOUNTING IN SCREED The Pro®Fin BE coating screed profile is embedded in the fall screed. The profile acts as a mould and exact screeding edge in one. The profiles are linked by profile connectors. The glass fibre mesh inlay is laid on the profile leg, which is undercoated with EP and sanded. Coating then takes place, followed by the scattering of colour chips and a clear coating.
|
Product features
Pro®Fin BP
- Edging for balcony coatings
- Mounting on fall screed with subsequent coating
- Bonding grooves for good bond of coating in the edge area
- Raised edge for clean edging and to prevent the coating running over
- Material: powder-coated aluminium
- With supports for hanging ProFin® balcony gutters
Pro®Fin BE
As Pro®Fin BP coating profile, but
- For embedding in the fall bonded screed with subsequent balcony coating
System components and accessories
Profiles accessories
- Print Page
- |
- up