Deutsch
Français
English
Italiano

Passive capillary drainage and waterproofing protection in one
for loose laying of natural stone and concrete paving.

AquaDrain® T+ provides rapid and permanent drainage of the covering structure. It prevents fouling and silt formation, which are common risks with loose paving.

Product structure

AquaDrain® T+ - The passive capillary drainage for loose coverings
AquaDrain® T+ - The passive capillary drainage for loose coverings
AquaDrain® T+ - The passive capillary drainage for loose coverings
AquaDrain® T+ - The passive capillary drainage for loose coverings

1a ProFin® RA edge profile with foil laminated sheeting

1b Combined drain/drip profile consisting of ProFin® DP drain edge profile + push-on facing plate ProFin® BL

2   ProFin KL drainage gravel strip

3   DiProtec® SDB quick sealing sheet

4   DiProtec® AB-K butyl sealing tape (plastic)

5   Standard seal as per
DIN 18195

6   Separating layer

7   AquaDrain® T+ surface drainage

8   AquaDrain® edge insulating strip with self-adhesive foot

9   AquaDrain® SL joint strip

10 AquaDrain® perforated bracket

11 AquaDrain® Flex drain grid

12 ProRin® BR balcony gutter

Area of application

Loose laid natural stone and concrete paving directly on AquaDrain® T+ or respectively on gravel/chippings as an even bed

Substrate/covering

Substrate requirements: Pressure resistant;
 for thermal insulation :EPS 035 DAA dh/XPS), min. 150 kPa

Suitable substrates:

  • Patio terraces with ground contact, roof terraces, loggias, cantilevered balconies
  • Old ceramic tile coverings / old coverings

Fall: Min. 1 % to max. 3 %

Seal: All types of sealing can be used

Covering sizes:
Ceramic components min. 50 x 50 x 2.5
Natural stone min. 40 x 40 x 3 cm
Concrete min. 40 x 40 x 4
Paving min. 12 x 24 x 5 cm

Height of structure including covering:  from approx. 55 mm

System components and accessories

Drainage accessories

AquaDrain® T+ - Accessories are available here (PDF in German)

Drain grates

For barrier-free transitions in compliance with  DIN 18024/18025
AquaDrain® BF / AquaDrain® BF-FLEX

For standard transitions
AquaDrain® FLEX / - DR / - KR / - TM

Profiles, gutters and pipes

ProFin® V40 Drainage profile
ProFin® V55 Drainage profile
ProFin® KL Gravel drainage strip
ProFin® DP Drain/drip profile
ProFin® BL Push-on facing plates
ProRin® BR Balcony gutter system
ProRin® AL Down pipe system

Seal

DiProtec® SDB Quick sealing membrane
DiProtec® KSK Cold applied self-adhesive sealing membrane
DiProtec® AB Floor gully

Advantages of AquaDrain® T+

  • The best drainage figures.
    Compared to other standard drainage mats (German Institute for Textile Construction and Environmental Technology  (tBU), Greven).
  • Capillary-breaking function offers reliable protection.
    Proven to eliminate frost damage caused by accumulated water, efflorescence  and damp stains
    (Research by German Materials Testing Institute (MPA), Darmstadt).
  • Damage-free for 18 years.
    At up to 16 mm, AquaDrain® T+ raises the surface higher than all other drainage mats and keeps its capillary-breaking function, even when water forms pools on the seal.
  • Up to +21dB footfall sound improvement.
    (Research by the University of Applied Sciences (Fachhochschule, FH) Wiesbaden).
  • Filter function of the geotextile fleece prevents fouling on the waterproofing layer.
  • Contact area of  66 % ensures advantageous load distribution with no high point loads.
  • Can also be used for large size formats out of doors.
  • 6 year warranty for specialist companies.