Information

AquaDrain® FLEX drain grates guide surface water directly into the attached drainage. This helps to solve connection problems, even with low door / wall connections. Thanks to the adjustable sliding feet, AquaDrain® FLEX drain grates can be cut to the required individual length on site.

Advantages

  • Shortening saves time and money: simple and versatile, directly on the construction site.
    Thanks to the two adjustable sliding feet and frame geometry.
  • The integral dirt trap protects against fouling.
    The trap prevents dirt from falling into the drain grate, therefore guaranteeing the long-term drainage performance of the drain grate and the drainage mat.
  • Simple, precise alignment at covering level using screw feet that can be continuously adjusted from above.
  • Maximum drainage performance due to drain grate open at the bottom combined in a system with AquaDrain® drainage mats.
  • Makes practical and standard-compliant reduction of the door threshold height from 15 to 5 cm possible.

Complete system

Produktaufbau AquaDrain T+ | © Gutjahr Systemtechnik
1 AquaDrain® T+ Surface drainage systems
2

AquaDrain® perforated angle bracket

3

AquaDrain® SL waterstop

4 AquaDrain® FLEX Drain grate
5

AquaDrain® dirt trap

6

AquaDrain® FLEX two adjustable sliding feet with screw foot

Brief technical information

Area of application In front of doors, floor-level window components or in line drainage
Frame material: Hot-dip galvanised steel or stainless steel 1.4301
Covers: Grid – hot-dip galvanised or stainless steel 1.4301
Square design – stainless steel
Profile design – stainless steel
Shadowline – stainless steel
Dirt trap: Integral
Can be shortened: Can be shortened to the required length
up to 400 mm (standard unit)
or 280 mm (extension unit)
Height adjustment: GV: from 53–100 mm (or 83 mm before foot thread is cut off on site)
with XL feet: from 60–175 mm (or 158 mm before foot thread is cut off on site) – at an extra charge
with 2XL feet: from 66–290 mm (or 273 mm before foot thread is cut off on site) – at an extra charge

GE: from 50–97 mm (or 80 mm before foot thread is cut off on site)
with XL feet: from 57–172 mm (or 155 mm before foot thread is cut off on site) – at an extra charge
with 2XL feet: from 63–287 mm (or 280 mm before foot thread is cut off on site) – at an extra charge

PE: from 50–97 mm (or 80 mm before foot thread is cut off on site)
with XL feet: from 57–172 mm (or 155 mm before foot thread is cut off on site) – at an extra charge
with 2XL feet: from 63–287 mm (or 270 mm before foot thread is cut off on site) – at an extra charge

QE: from 50–97 mm (or 65 mm before foot thread is cut off on site)
with XL feet: from 57–172 mm (or 140 mm before foot thread is cut off on site) – at an extra charge
with 2XL feet: from 63–287 mm (or 277 mm before foot thread is cut off on site) – at an extra charge

SL: from 50–97 mm (or 80 mm before foot thread is cut off on site)
with XL feet: from 57–172 mm (or 155 mm before foot thread is cut off on site) – at an extra charge
with 2XL feet: from 63–287 mm (or 270 mm before foot thread is cut off on site) – at an extra charge

BE: from 50–97 mm (or 80 mm before foot thread is cut off on site)
with XL feet: from 57–172 mm (or 155 mm before foot thread is cut off on site) – at an extra charge
with 2XL feet: from 63–287 mm (or 270 mm before foot thread is cut off on site) – at an extra charge