Information

AquaDrain® KR has been specially developed for quick and easy laying on gravel/chippings mortar. The gravel strip integrated into the gully bottom prevents coarse dirt from being carried into the drainage layer. Different grates made from steel or stainless steel open up the kind of design options which are often required, particularly in longer sections of line drainage.

Advantages

  • Quick & easy.
    Direct laying on gravel/chippings. Direct connection to the flagging. End caps make neat installation easier with line drainage.
  • Long-term corrosion protection.
    The usual box gutters are usually made from strip galvanised (sendzimir galvanised) steel sheets and subsequently cut to length, slit or punched. This leaves the cut and punched edges susceptible to corrosion. The AquaDrain® KR gutter channel is sendzimir galvanised and has a coating with a particularly high zinc content. It is also powder-coated after punching to protect against corrosion.
  • Continuously variable height – slit version only.

Complete system

Produktaufbau AquaDrain T+ | © Gutjahr Systemtechnik
AquaDrain KRU | © Gutjahr Systemtechnik

Brief technical information

Use of slit version: In front of doors, floor-level window components or in line drainage
Height of box gully: 40mm
Can be shortened: Variable
Gutter channel: Sendzimir galvanised sheet steel, powder coated
Height adjustment (optional): 62-93 mm (or 80 mm before foot thread is cut off on site)
with XL feet: 69–168 mm (or 155 mm before foot thread is cut off on site) – at an extra charge
Height adjustment (optional): 62-93 mm (or 80 mm before foot thread is cut off on site)
with XL feet: 69–168 mm (or 155 mm before foot thread is cut off on site) – at an extra charge