Information

The comprehensively tested IndorTec® THERM-W hot water heating system impresses with its low construction height of just 30 mm including insulation. The dry construction system ensures rapid and easy installation, because there is no need for elaborate work with screed. This saves time and costs.

Advantages

  • Dry construction system without screed
    • extremely quick laying
    • no waiting for drying
    • significantly reduced weight
  • With system height of just 30 mm
    ideal for renovation.
  • Uniform covering heating
    thanks to aluminium heat conducting baffle laminated on in the factory.
  • Quick to react and energy saving,
    because there is no need to heat thick layers of screed.
  • Optimum use of modern heating technology and reusable energy forms such as heat pumps or solar technology
    due to low flow temperatures/effective heating performance.
  • Better insulation and less footfall noise
    thanks to innovative, high-quality Neo-EPS insulation material footfall noise reduction (based on DIN EN ISO 140-8).
  • Quick and easy processing
    thanks to self-adhesive decoupling mat.
  • Maximum reliability thanks to comprehensive test certificates

Complete system

1

Neo-EPS insulating plate, 26 mm thick

2

Aluminium heat-conducting baffle laminated on in the factory

3

Heating pipe in a Ω-shaped guide

4

IndorTec® THERM 2E-SK self-adhesive decoupling mat

5

IndorTec THERM TUB 10 dry underfloor element

6

Tiles/natural stone in a thin layer of mortar

7

suitable coverings such as PVC, carpet, linoleum or multi-layer parquet

Brief technical information

Usage area: • Interiors
• For heating/temperature control of floor coverings on unheated surfaces
Suitable substrates: • Rough concrete ceilings
• Cement, calcium sulphate and cast asphalt screeds
• Wood substrates
Substrate requirement: even, pressure resistant, load-bearing, non-flexing and free of substances and surfaces which are difficult to adhere to
Coverings: • In a system on IndorTec® THERM 2E-SK decoupling mat
- Tiles: at least 10 mm thick
- Natural stone: at least. 20 mm thick
- Minimum format 30 x 30 cm

• In a system on IndorTec® THERM TUB 10 dry underfloor element
- In combination with suitable coverings such as PVC, carpet, linoleum or multi-layer parquet

Components & accessories