MorTec® SOFT

The joint filler that comes in a tube

MorTec® SOFT


The joint filler that comes in a tube.
Special joint filler for stress-free laying of outdoor coverings

In combination with Gutjahr surface drainage systems, "the joint filler that comes in a tube" enables stress-free and therefore reliable laying of large formats outdoors. The elastic, silicon-based joint filler reduces tension and can be used for covering joints, connection joints or expansion joints. Its special feature: Thanks to the fine grain structure of the material, the joints have a cement-like appearance.

MorTec® SOFT

MorTec® SOFT, "the joint filler that comes in a tube", enables stress-free laying of large-format paving outdoors. Thanks to the fine grain structure of the material, the joints have a cement-like appearance.

Technical information
  • MorTec® SOFT is a special joint filler with a fine grained structure based on a solvent-free, neutral curing, fungicide containing silicon sealant.
  • MorTec® SOFT is suitable for ceramic, natural stone and concrete coverings.
  • Skin formation: approx. 5 mins./23° C
  • Curing in 24 h: 3 mm/23° C
  • Processing temperature: + 5° C to + 35° C
  • Permissible total deformation: 20 %
  • Temperature resistance after curing: + -20 ° C to + 150° C
  • 1 cartridge provides 12.5 m of joints with a joint cross-section of 5 mm x 5 mm = 25mm²
Application areas

Conditions for use for drainage systems:

System Covering joints Connection joints Movement gap spacing
Gap width:= 5 mm
Type of laying*
Watec®Drain KP+ = 5 mm width = 10 mm width 5 m for lighter coloured coverings
3 m for darker coloured coverings
JC
TerraMaxx® PF
TerraMaxx® DS
= 3 mm width = 10 mm width No expansion joints needed JC, LO
AquaDrain® EK = 5 mm width = 10 mm width 5 m for lighter coloured coverings
3 m for darker coloured coverings
JC, LO

 * JC = laying with joint cuts, LO = laying offset