IndoTec® FLEXDRAIN

Shower gully system with second drainage level

IndorTec® FLEXDRAIN noise protection system

  Noise protection system with the best test values for installation and footfall noise

The IndorTec® FLEXDRAIN noise protection system with the best test values for installation noise and footfall noise. It consists of the unique IndorTec® FLEX-DRAIN shower gully with second drainage level and integrated Fixbau quick construction adapter, and ensures easy gully assembly. The load distribution plate with integral seal ensures optimum stability and sealing for the complete system, and in combination with the IndorTec® FLEXDRAIN SM noise protection mat it achieves optimum values.

IndorTec® FLEXDRAIN noise protection system

IndorTec® FLEXDRAIN noise protection system

IndorTec® FLEXDRAIN with

1.    IndorTec® LP load distribution plate
2.    IndorTec® FLEXDRAIN SM soundproof mat
3.    IndorTec® FR flexible pipe
4.    IndorTec® GP fall profile
5.    IndorTec® FLEXDRAIN BP facing profile

IndorTec® FLEXDRAIN noise protection system

Seals Accessories
IndorTec® FLEXDRAIN noise protection system

IndorTec® SEAL sealing system

Technical information

Soundproofing kit:

IndorTec® FLEXDRAIN LP load distribution plate

  • 3 sizes:

    • 990 mm x 800 mm 
    • 1190 mm x 995 mm 
    • 1,390 mm x 1,110 mm

  • 3 mm sandwich panel with laminated IndorTec® SEAL membrane on the top and on the underside
  • Guarantees even load distribution, even with extremely little pipe coverage, and can be used with all installation variants

 

IndorTec® FLEXDRAIN SM soundproof mat

  • Material: PU-bonded rubber fibres/elastomers, thickness 17 mm
  • Best values for footfall and installation noise, tested in the system
  • Use combined with IndorTec® FLEXDRAIN under the shower gully and screed

Accessories:

IndorTec® FLEXDRAIN FR flexible pipe

  • High-quality plastic
  • Makes connection to the drain easier; there is no further need for different-sized pipe elbows
  • The inside of the pipe is smooth, which makes thorough cleaning with the pipe cleaning spiral easier
  • Length 750 mm, inflow DN40, outflow DN40 or DN50 (by cutting the end piece to size)

IndorTec® FLEXDRAIN GP fall profile

  • Length 1250 mm
  • Material: 2 mm brushed stainless steel
  • For cladding the sides of floor-level showers
  • Adhesion with DiProtec® FIX-MSP

IndorTec® FLEXDRAIN BP facing profile

  • Material: 2 mm brushed stainless steel
  • For cladding the wall surfaces above shower gullies
  • Use in combination with IndorTec® FLEXDRAIN GP fall profile
  • Adhesion with DiProtec® FIX-MSP

IndorTec® FLEXDRAIN EA corner seal

  • Material: PE membrane, fleece laminated on both sides
  • For reliable sealing for floor level showers
  • Pre-shaped corners, left and right versions
  • Height=20 mm
  • Adhesion with DiProtec® FIX-MSP

Minimum width for screed cut-out
IndorTec® FLEX-DRAIN 750 = minimum width always 78.5 cm;
IndorTec® FLEX-DRAIN 950 = minimum width always 98.5 cm

Maximum screed cut-out with IndorTec® FLEXDRAIN load distributing plate

  • 990 x 800 mm: Narrow application = width max. 820 mm x depth max. 1092 mm; wide application = 1010 mm x depth max. 902 mm
  • 1,190 x 995 mm: Narrow application = width max. 1,015 mm x depth max. 1,292 mm; wide application = width 1,210 mm x depth max. 1,097 mm

Screed cut-out height
62 mm or respectively 82 mm + height for fall of 2.00 % (2 cm per 1 m)
Depending on construction height, ≥ 62 mm or respectively ≥ 82 mm + fall, the lower layer of insulation (footfall sound insulation) can be used over its full surface.