Information

AquaDrain® SD step drainage systems reliably protect outdoor steps made from ceramic and natural stone/concrete from efflorescence and frost damage caused by accumulated water. They can be used as drainage in a medium bed, on (drainage) mortar or on mortar strips for block steps or drainage mortar in a bond.

Advantages

  • The only single-component drainage system using factory pre-shaped angled elements.
  • Unique intelligent special fleece.
    Once the laying mortar has hardened, the fleece gradually disintegrates. Calcification of the fleece pores is avoided.
  • Drainage provides reliable protection.
    From frost damage and efflorescence caused by accumulated water. Speeds up drying of natural stone.
  • Versatile to use.
    Can also be combined with AquaDrain® and Watec® surface drainage mats for terraces with steps leading down.
  • 6 year warranty for specialist companies.

Complete system

1

AquaDrain® SD water guidance strip

2 AquaDrain® SD - construction type 1 Step drainage
3

AquaDrain® UB universal tape

4

AquaDrain® UB universal tape

5

AquaDrain SD mesh

Brief technical information

Area of application For outdoor steps in private and public areas.
Types of covering Coverings such as those recommended by the covering manufacturer for the respective usage area and the respective type of covering laying are suitable.
Substrates • Substrates must be level, load bearing and solid. They must be non-resilient and non-compressible.
• Uneven surfaces > 4 mm must be compensated for.
Load-bearing capacity AquaDrain® SD: 2,000 kg/m2
Drainage performance AquaDrain® SD: up to 0.72 l/(m*s) with 1 % fall
Insulation Pressure-resistant thermal insulation, bonded to the substrate free of cavities, non-resilient and non-compressible.
Fall ≥ 1.0 % to 2.5 %