Information

The AquaDrain® TM drain grate with its ultra-flat frame geometry is perfectly coordinated to the TerraMaxx® laying procedure for thin-layer, lightweight coverings. It is also suitable as a drainage line in front of parapets in combination with the Watec® Drain KP+ thin-layer drainage mat.

Advantages

  • Reliable drainage of outdoor surfaces and door thresholds at construction heights of only 31 mm.
    AquaDrain® TM in a system with the TerraMaxx® laying procedure makes it possible to have total heights from 31 mm including covering.
  • Can be cut to length as required.
  • Integral dirt trap protects against fouling.
    The trap prevents dirt from falling into the drain grate, therefore guaranteeing the permanent drainage performance of the drain grate and the drainage mat.
  • Easy height adjustment thanks to 6 continuously adjustable screw feet.
    Precise, uncomplicated and time-saving alignment to the covering level.
  • Maximum drainage performance thanks to drain grate which is open at the bottom.
    Guarantees maximum drainage without water accumulation in combination with the TerraMaxx® laying procedure or Watec® thin-layer drainage mats in front of parapets. Façade and surface water is drained quickly and efficiently into the surface drainage beneath the covering.

Complete system

1 AquaDrain® T+ Surface drainage systems
2

TerraMaxx® PF-FM special fixing compound

3

AquaDrain TM

4

AquaDrain® dirt trap

5

AquaDrain® TM screw foot set

Brief technical information

Usage area: In front of doors, floor-level window components or in line drainage
Frame material: Hot-dipped galvanised steel or stainless steel 1.4301
Covers: Grid – hot-dip galvanised
Square design – stainless steel
Profile design – stainless steel
Dirt trap: Integral
Höhenverstellung: GV: 31 bis 46 mm (Gewindestab vom Drehfuß schraubt sich
zwischen den Gitterstäben durch, somit entfällt bauseitiges Abflexen), XL Drehfuß: 31–72 mm (bzw. 55 mm vor bauseitigem Abflexen des Fußgewindes)

QE: 25–42 mm, (33 mm vor bauseitigem Abflexen des Fußgewindes),
XL Drehfuß: 25–68 mm (59 mm vor bauseitigem Abflexen des Fußgewindes)

PE: 28–44 mm, (34 mm vor bauseitigem Abflexen
des Fußgewindes), XL Drehfuß: 28–68 mm ( 58 mm vor bauseitigem Abflexen des Fußgewindes)